COST COMPARISON CHART
Customer
saves OVER 30% on project. Compare your costs TODAY!
Thrifty-Pull
custom control cables and assemblies install faster and
eliminate downtime.
Example:
Pulling Singles vs.
Thrifty-Pull
Wire Assemblies - On one 650' run between
two machines and the master control panel, requiring 47 #14 AWG THHN wires
| |
Pulling Single Wires |
Thrifty-Pull
Custom Assemblies |
|
Wire Cost |
$
2,369
(32,900 ft. @ $72/M-ft)
(47 cond. x 650 ft. plus waste) |
$3,111
(650 ft 47 cond. 14 awg)
|
|
Labor Cost |
$3,615 (120.5 hours @ $30/hr)
Hours Breakdown:
Measure/Order: 2 hrs
Set-up/Tag/Pull: 110 hrs
Terminate: 3.8 hrs
Ring Out: 4.7 hrs. |
$1,005 (33.5 hours @ $30/hr)
Hours Breakdown:
Measure/Order: 6 hrs
Set-up/Pull: 23.7 hrs
Terminate: 3.8 hrs
|
|
TOTAL
Job Cost |
$ 5,984 |
$ 4,116 |
This represents a savings of over 30%!
This is for comparison only. Actual prices may vary.
Thrifty-Pull
is UL and CSA Listed. All assemblies are built to your specifications. You
specify wire type, gauge, color and stranding - building wire, electronic
cable, coax cable, fiber optic too! We print the alpha-numeric ID of your
choice every 2" on each conductor. Each assembly comes
with a continuous, sequential footage tape and is factory-bound with strong
resin bonded nylon.
Thrifty-Pull
products provide many advantages including smoother and faster pulling,
error-free terminations, one reel set up, and no tagging or ring-out
required. |
